Garg Brothers Plaster Industries excel in Readymix Gypsum Plaster Manufacturers & Suppliers which is used for excellent wall surface finish. Our product in the name of Shyam Sri Ram Plaster provides an excellent finish to interior walls, ceilings and columns. Directly applied to a wall, it has an extensive use in residential and commercial complexes in civil engineering and other areas of construction and interior designing. It is a ready-to-use dry powder that is light brown in colour, manufactured to provide high-early strength within a very short span of time by mixing optimum quantity of water.
Ready Mix Plaster Manufacturers & Suppliers
Area of Application:
- Internal bare brick walls
- Hollow Concrete Blocks
- Concrete Columns
- R.C.C Ceilings
- Shiperox Blocks Work
- Flawless whiteness, an expression of purity
- User friendly and easy in application
Packaging Details
Available in 20 Kg, 25 Kg & 40 Kg Bags.
SHYAM SRI RAM Plaster is a pure gypsum based plaster suitable for most internal walls and partition surfaces including bricks, blocks, cement and concrete
This ready mix single application plaster consists of pure gypsum hemi hydrates formulated with special additives to improve the performance and workability.
Depending on the type of application surface, even or uneven, it can be effectively used for both fine surface finishing and thick base plastering. SHYAM SRI RAM Ready Mix Plaster is very economical as it covers more area with less material as it is a low density powder.
Gypsona ready mix plaster works successfully on both even and uneven base, which implies that this ready mix can be utilized for both fine surface completing and thick base putting according to the requirement. Gypsona is the leading Readymix Gypsum Plaster Manufacturers & Suppliers in Rajasthan and Delhi, NCR. This product easily available and efficient to use. A product made with refined and processed gypsum and vermiculite along with mix of premium quality special binders and additives to provide easier application, better bonding and smooth finish. Our ready mix plaster is a fine quality Plaster of Paris blend exceptionally made to give a better complete than the inside wall. Readymix Gypsum Plaster Manufacturers & Suppliers help in instant plastering of interior walls saving your time, money, labour and also giving your home the beauty that you desire. It creates a surface so smooth that no other layer is required below or above it and direct application of paint can be done.
Each batch of Gypsona Ready Mix Gypsum Plaster goes through stringent quality control procedures in every step from selection of raw materials to its processing and packaging, using latest technology and equipments.
- Super white finish.
- Good thermal resistance.
- Great bonding with surface.
- Excellent strength after drying.
- Smooth & Matt Finish
- Direct application on Bricks, Blocks, RCC and other surfaces.
- Ready to paint surface achieved.
- Spreads and finishes to a minimum thickness increasing the carpet area.
- Fire resistant.
- Eco-friendly.
- No shrinkage cracks.
- Better, smoother and consistent finish.
- Time saving (reduces plastering time by 70% as compared to traditional plaster).
- More durable.
- Lesser dead load on the structure as it is lightweight plaster.
- No water curing required.
- Low thermal conductivity helps to save electricity
- User friendly.
- Plaster should be added to water and not vice-versa.
- Add 25 Kg. of plaster to 15-17 Litre of water and mix until a homogeneous mixture is attained.
- Make sure to clean the tools before using them.
- Apply the plaster to surface with firm pressure and carry out flattening as the surface stiffens.
- Trowel the surface progressively till you attain a smooth finish.
- The recommended thickness of the Plaster is 10-13 mm.
- Finished surface should be protected from continuous exposure to moisture as it may cause loss of strength.
- Paint should be applied on the surface after the surface is completely dry.
- Fully sealed and tamper proof packaging available in 25 and 40 Kg. packs.
- Shelf life of sealed pack is 3 months.
- Use the material before 7 days once the bag is open.
- The pack should be kept away from damp places and stored in a moisture free environment.
- Colour of finished surface : Off White
- Bulk Density : 1020 Kg/m2
- Setting time: 25-35 mins.
- Coverage of 25 Kg bag at 13 mm. thickness: 20-21 sq. ft.
- Compressive strength : 60-70 Kg/cm2