Gypsum Plaster

POP Cement

We are the best Gypsum Plaster Manufacturers in Rajasthan with rich industrial experience of more than 25 years; we are engaged in offering top of the quality Gypsona® Gypsum Plaster that is manufactured with India’s finest raw gypsum with proper removal of unwanted silica from the plaster. The complete process is conducted under the close supervision of our expert Quality Assurance personnels. The result is a Gypsona Gypsum plaster (commonly known as POP) of unmatched whiteness, purity and fineness. (In fact, its purity has been tested to be as high as 90% and whiteness over 80 lumens). It is smooth, strong & extra white, making it ideal for intricate decorative pattern like molding, false ceiling etc.

Plaster of paris is a building material used for the protective and/or decorative coating of walls and ceilings and for moulding and casting decorative elements.

  • Super white finish.
  • Good thermal resistance.
  • Great bonding with surface.
  • Excellent strength after drying.

 

  • Ready to paint surface achieved.
  • Fire resistant.
  • Eco-friendly.
  • Better, smoother and consistent finish.
  • More durable.
  • Gradual setting time
  • No water curing required.
  • No shrinkage cracks.
  • Enhanced aesthetics
  • Longer Life span
  • Lesser dead load on the structure as it is lightweight plaster
  • Eco-friendly

 

  • Gypsum plaster should be added to water not vice-versa until a homogeneous mixture is attained. (Water gypsum ratio 70 % )
  • Apply Gypsum plaster on the wall and trowel the surface progressively till you attain a smooth finish.
  • The recommended thickness of the Gypsum plaster is 10-15 mm.
  • Finished surface should be protected from continuous exposure to moisture as it may cause loss of strength.
  • Paint should be applied on the surface after the surface is completely dry
  • Fully sealed and tamper proof packaging available in 25 and 40 Kg. packs.
  • Shelf life of sealed pack is 3 months.
  • Use the material before 7 days once the bag is open.
  • The pack should be kept away from damp places and stored in a moisture free environment.
  • Colour : Off White
  • Water/Plaster ratio : 70-75 %
  • Initial Setting Time : 12 min
  • Final Setting Time : 20 min.
  • Flexural Strength : Upto 3 N/mm2 after seven days
  • Compressive Strength 9 N/mm2 after 7 days
  • Fineness : 425 micron sieve pass – 100% , 100 micron sieve pass – More than 99%
  • CaSo4.1/2H2O : More than 90
  • Sodium Cloride Content (NaCL) : 0.01-0.02%
  • Silica Oxide : Less than 0.53%
  • Calcium Carbonate : 0.08-0.09%
  • Iron Oxide (Fe2O3) : Less than 0.05%